China NSK, NTN,Koyo, Zwz,Lyc,C&U Bearing,6211,6212,6213,6214,6215,6216,6217,6218,6219,6220,6306,6307,6308,6309,6310,6311,6312, 6313,6314,6315 2RS 2rz Zz 2z Zn Zzn Znb bearing and race

Solution Description

Deep groove ball bearings are the most broadly utilized bearing type and are specifically flexible. They have minimal friction and are optimized for lower noise and minimal vibration which permits high rotational speeds. They accommodate radial and axial masses in each instructions, are simple to mount, and require significantly less upkeep than other bearing sorts. 
 

Features and positive aspects

  • Reduced friction and operating temperatures, lower sounds and vibration
  • Higher managing speeds
  • Substantial high quality and efficiency capabilities for your application
  • Accommodate radial masses and axial hundreds in equally directions
  • Available with a variety of greases for most situations, including foods top quality grease, substantial temperature grease and Strong Oil
  • Improved trustworthiness and provide lengthy bearing and lubricant services life 

Sort: Deep Groove Ball Bearing
Cages Material:SPCC, PA66 ,Copper,stainless metal.
Seals Kind: ZZ,Z RZ,RS,2RS
Technical information:

6000 sequence deep groove ball bearings(element of)
Bearing No. Boundary Dimensions(mm) Basic Load Rating(N) Weight(KG)
d D B Cr Cor
604 4 twelve 4 960 350 .571
605 5 14 5 1070 420 .0037
606 six seventeen six 1960 730 .0069
607 seven 19 six 2800 1060 .0082
608 eight 22 seven 3290 1360 .0129
609 9 24 7 3330 1410 .016
6000 10 26 eight 4160 1780 .019
6001 twelve 28 eight 5110 2380 .571
6002 15 32 nine 5590 2840 .03
6003 17 35 10 6000 3250 .039
6004 twenty forty two 12 9390 5571 .069
6005 twenty five 47 twelve 10060 5860 .08
6006 thirty 55 thirteen 11900 7460 .12
6007 35 62 fourteen 16210 10420 .16
6008 40 68 fifteen 17030 11700 .19
6009 forty five seventy five sixteen 21080 14780 .25
6571 50 80 16 22000 16260 .26
6011 fifty five 90 18 31500 18400 .39
6012 sixty ninety five eighteen 30000 23000 .42
6013 65 a hundred eighteen 32000 25000 .44
6014 70 110 twenty 38000 31000 .six
6015 seventy five a hundred and fifteen 20 38000 31000 .sixty four
6016 eighty a hundred twenty five 22 47500 40000 .85
6017 85 130 22 47500 40000 .89
6018 90 one hundred forty 24 63800 59000 1.15
6019 95 a hundred forty five 24 66700 62300 one.two
6571 a hundred a hundred and fifty 24 72500 70000 1.25

If you want to buy this bearing,just get in touch with me.

Manufacturer Title: LYC/HRB/ZWZ/C&U/NSK/OUR Brand / OEM
Clearance : C2 / C0 / C3 / C4 / C5
Tolerance : ABEC1 (P0) / ABEC3(P6) / ABEC5(P5) / ABEC7(P4) / ABEC9 (P2)
Vibraztion : Z1V1 / Z2V2/ Z3V3
Packing : (1)Tube packing + Neutral Carton + Wooden pallet                 
                (2)Acoording to customer’s prerequisite

SAMPLES
one. Samples quantity: 1-10 PCS are offered.
2. Free of charge samples: It depends on the Product No., material and quantity. Some of the bearings samples need shopper to pay samples demand and shipping value.
three. It truly is greater to begin your purchase with Trade Assurance to get total security for your samples get.

Tailored
The tailored Emblem or drawing is suitable for us.

MOQ
one. MOQ: ten PCS standard bearings.
2. MOQ: one thousand PCS tailored your brand name bearings.

OEM Policy
1. We can printing your brand name (logo, artwork)on the defend or laser engraving your model on the defend.
2. We can custom made your packaging according to your design
three. All copyright possess by consumers and we promised will not disclose any data.
 

US $0.2-60
/ Set
|
1 Set

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Contact Angle:
Aligning: Non-Aligning Bearing
Separated: Unseparated

###

Samples:
US$ 1/Set
1 Set(Min.Order)

|

Order Sample

###

Customization:

###

6000 series deep groove ball bearings(part of)
Bearing No. Boundary Dimensions(mm) Basic Load Rating(N) Weight(KG)
d D B Cr Cor
604 4 12 4 960 350 0.0023
605 5 14 5 1070 420 0.0037
606 6 17 6 1960 730 0.0069
607 7 19 6 2800 1060 0.0082
608 8 22 7 3290 1360 0.0129
609 9 24 7 3330 1410 0.016
6000 10 26 8 4160 1780 0.019
6001 12 28 8 5110 2380 0.022
6002 15 32 9 5590 2840 0.03
6003 17 35 10 6000 3250 0.039
6004 20 42 12 9390 5020 0.069
6005 25 47 12 10060 5860 0.08
6006 30 55 13 11900 7460 0.12
6007 35 62 14 16210 10420 0.16
6008 40 68 15 17030 11700 0.19
6009 45 75 16 21080 14780 0.25
6010 50 80 16 22000 16260 0.26
6011 55 90 18 31500 18400 0.39
6012 60 95 18 30000 23000 0.42
6013 65 100 18 32000 25000 0.44
6014 70 110 20 38000 31000 0.6
6015 75 115 20 38000 31000 0.64
6016 80 125 22 47500 40000 0.85
6017 85 130 22 47500 40000 0.89
6018 90 140 24 63800 59000 1.15
6019 95 145 24 66700 62300 1.2
6020 100 150 24 72500 70000 1.25
US $0.2-60
/ Set
|
1 Set

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Contact Angle:
Aligning: Non-Aligning Bearing
Separated: Unseparated

###

Samples:
US$ 1/Set
1 Set(Min.Order)

|

Order Sample

###

Customization:

###

6000 series deep groove ball bearings(part of)
Bearing No. Boundary Dimensions(mm) Basic Load Rating(N) Weight(KG)
d D B Cr Cor
604 4 12 4 960 350 0.0023
605 5 14 5 1070 420 0.0037
606 6 17 6 1960 730 0.0069
607 7 19 6 2800 1060 0.0082
608 8 22 7 3290 1360 0.0129
609 9 24 7 3330 1410 0.016
6000 10 26 8 4160 1780 0.019
6001 12 28 8 5110 2380 0.022
6002 15 32 9 5590 2840 0.03
6003 17 35 10 6000 3250 0.039
6004 20 42 12 9390 5020 0.069
6005 25 47 12 10060 5860 0.08
6006 30 55 13 11900 7460 0.12
6007 35 62 14 16210 10420 0.16
6008 40 68 15 17030 11700 0.19
6009 45 75 16 21080 14780 0.25
6010 50 80 16 22000 16260 0.26
6011 55 90 18 31500 18400 0.39
6012 60 95 18 30000 23000 0.42
6013 65 100 18 32000 25000 0.44
6014 70 110 20 38000 31000 0.6
6015 75 115 20 38000 31000 0.64
6016 80 125 22 47500 40000 0.85
6017 85 130 22 47500 40000 0.89
6018 90 140 24 63800 59000 1.15
6019 95 145 24 66700 62300 1.2
6020 100 150 24 72500 70000 1.25

Choosing the Right Ball Bearing for Your Application

When choosing a Ball Bearing, there are several things to consider. These factors include: the size, lubricant type, presence of corrosive agents, stray electrical currents, and more. It can be challenging to choose the right type, size, and type of ball bearing for your application. You should also carefully calculate the loads to determine the right size. Here are some tips for choosing the right Ball Bearing for your application.

Single-row

The single-row ball bearing is one of the most popular types of bearings. The inner and outer ring are designed with raceway grooves that are shaped slightly larger than the balls. This type of bearing has a low torque and can handle high-speed applications with minimal power loss. The radial dimensions of single-row ball bearings also vary, so it is possible to find one that fits your specific application. Besides the above-mentioned advantages, single-row ball bearings are also available with varying grease levels and are widely applicable to applications where the space is limited.
Single-row ball bearings are also called angular-contact ball bearings. Because of their single-row design, they are not separable and can accommodate a high-speed, heavy-duty application. Single-row angular-contact ball bearings can only handle axial load in one direction, and they must be installed in pairs for pure radial loads. Single-row ball bearings are a popular type of rolling bearings and can be used for a wide range of applications.
bearing

Self-aligning

The self-aligning ball bearing was invented by Sven Wingquist, a plant engineer for a textile company in Sweden. While he was responsible for making production as efficient as possible, he soon realized that the machinery he had in place wasn’t working as efficiently as it could. Although ball bearings are great for reducing friction, they were not flexible enough to compensate for misalignments in the machine.
Self-aligning ball bearings have two rows of balls and a common sphered raceway. The inner ring is curved and combines the two rows of balls into one cage. These bearings can tolerate shaft misalignment and compensate for static angular defects. They can be used in simple woodworking machinery, ventilators, and conveying equipment. They are often the preferred choice for applications where shaft alignment is an issue.

Ceramic

A Ceramic ball bearing is a type of high-performance bearing that is available in both full-ceramic and hybrid forms. The main differences between ceramic and steel ball bearings are their construction, lubrication, and mobility. High-quality ceramic ball bearings are durable, and they are ideal for corrosive and high-temperature applications. The material used to create these bearings helps prevent electrolytic corrosion. They are also ideal for reducing the friction and lubrication requirements.
Ceramic balls are harder and less brittle than steel balls, which gives them a higher degree of rigidity. Ceramics also have a higher hardness, with a hardness of Rc75-80 compared to Rc58-64 for steel balls. Their high compressive strength is approximately 5 to 7 times greater than steel. In addition, they have a very low coefficient of friction, which allows them to spin at higher speeds and with less friction. This increases their lifespan and durability, and decreases the energy needed to turn cranks.

Steel

Unlike traditional bearings, steel balls have a relatively uniform hardness. Carbon steel, for instance, is 2.1% carbon by weight. According to the American Iron and Steel Institute, copper content must be no more than 0.40% and manganese content should not be more than 1.65 g/cm3. After carbonizing, steel balls undergo a process called sizing, which improves their roundness geometry and hardness.
The main differences between steel ball bearings and ceramic ball bearings can be traced to their different materials. Ceramic balls are made from zirconium dioxide or silicon nitride. Silicon nitride is harder than steel and resists shocks. The result is increased speed and longer service life. Polyoxymethylene acetal (PMMA) bearing balls are known for their stiffness, strength, and tolerance, but are not as common as steel ball bearings.

Plastic

The most popular types of plastic ball bearings are made of polypropylene or PTFE. These bearings are used in applications requiring higher chemical resistance. Polypropylene is a structural polymer that offers excellent physical and chemical properties, including excellent resistance to organic solvents and degreasing agents. Its lightweight, low moisture absorption rate, and good heat resistance make it an excellent choice for high-temperature applications. However, plastic bearings are not without their drawbacks, especially when operating at very high temperatures or under heavy loads.
Compared to metal bearings, plastic ball-bearings do not require lubrication. They also are highly corrosion-resistant, making them an excellent choice for wash-down applications. They are also post-, autoclave-, and gamma sterilizable. Many conventional steel ball-bearings cannot handle the high temperatures of food processing or swimming pools. In addition to high temperature applications, plastic ball bearings are resistant to chemicals, including chlorine.
bearing

Glass

Plastic sliding bearings are molded bearings made of engineering plastic. With self-lubricating modification technology, these bearings can be produced by injection molding of plastic beads. They are widely used in various industries such as office equipment, fitness and automotive equipment. In addition to plastic bearings, glass balls are used in a variety of other applications, including medical equipment. Glass ball bearings have excellent corrosion resistance, excellent mechanical properties, and are electrically insulators.
Plastic ball bearings are made of all-plastic races and cages. These bearings are suitable for applications that are exposed to acids and alkalis. Because they are cheaper than glass balls, plastic ball bearings are popular in chemical-exposed environments. Stainless steel balls are also resistant to heat and corrosion. But the main disadvantage of plastic ball bearings is that they are not as strong as glass balls. So, if weight and noise is your main concern, consider using plastic balls instead.

Miniature

The global miniature ball bearing market is expected to reach US$ 2.39 Billion by 2027, at a CAGR of 7.2%. Growth in the region is attributed to technological advancement and government initiatives. Countries such as India and China are attracting FDIs and emphasizing the establishment of a global manufacturing hub. This is boosting the market for miniature ball bearings. The miniscule ball bearings are manufactured in small quantities and are very small.
Some manufacturers produce miniature ball bearings in different materials and designs. Chrome steel is the most popular material for miniature ball bearings because of its high load capacity, low noise properties, and lower cost. But the cost of stainless steel miniature bearings is low, since the amount of steel used is minimal. Stainless steel miniature bearings are the smallest in size. Therefore, you can choose stainless steel mini ball bearings for high-speed applications.

Angular-contact

Angular-contact ball bearings have three components: a cage, inner ring, and balls. Angular-contact ball bearings can support high axial and radial loads. Various design and manufacturing attributes make angular-contact ball bearings suitable for a variety of applications. Some features of this bearing type include a special lubricant, different cage materials, and different coatings.
The size of an angular-contact ball bearing is determined by the design units: outer ring width, axial load, and radial load. Depending on the type of application, an angular-contact ball bearing may be manufactured in double-row, triple-row, or quadruple-row configurations. Angular contact ball bearings can be classified according to their design units, which range from metric to imperial. A higher ABEC number means tighter tolerances. To determine the tolerance equivalent of a particular bearing, consult a standard Angular-contact ball bearing table.
Angular-contact ball bearings feature high and low-shoulder configurations. They have two-dimensional races that accommodate axial and radial loads. They are available in self-retaining units with solid inner and outer rings, and ball and cage assemblies. Cages made of cast and wrought brass are the most popular, but lightweight phenolic cages are also available. The latter is a better choice because it doesn’t absorb oil and has lower rolling friction.
bearing

Materials

When it comes to the construction of a ball bearing, high-quality raw materials are a crucial component. These materials not only affect the overall quality of a ball bearing, but also influence the cost. That’s why you should pay close attention to raw material quality. In addition to that, raw materials should be tested several times before the manufacturing process to ensure quality. Read on for some information about the different types of materials used to make ball bearings.
Steel is the most common material for ball bearings. Most ball bearings contain stainless steel balls, which are remarkably corrosion-resistant. They are also resistant to saltwater and alkalis. However, stainless steel balls are heavier than plastic ones, and they are also magnetic, which may be a drawback in some applications. If you’re looking for a metal-free option, glass balls are the way to go. They’re sturdy, lightweight, and resistant to a wide range of chemicals.

China NSK, NTN,Koyo, Zwz,Lyc,C&U Bearing,6211,6212,6213,6214,6215,6216,6217,6218,6219,6220,6306,6307,6308,6309,6310,6311,6312, 6313,6314,6315 2RS 2rz Zz 2z Zn Zzn Znb     bearing and raceChina NSK, NTN,Koyo, Zwz,Lyc,C&U Bearing,6211,6212,6213,6214,6215,6216,6217,6218,6219,6220,6306,6307,6308,6309,6310,6311,6312, 6313,6314,6315 2RS 2rz Zz 2z Zn Zzn Znb     bearing and race
editor by czh 2022-12-20